Giantco GW: history, specs, pictures
The Giantco GW50 was a single cylinder, four-stroke standard produced by Giantco in 2010. Max torque was 2.36 ft/lbs (3.2 Nm) @ 4250 RPM. Claimed horsepower was 2.41 HP (1.8 KW) @ 7000 RPM.
| Giantco GW | |
| Manufacturer | |
|---|---|
| Also called | GW50, GW 50 |
| Production | 2010 |
| Engine | single cylinder, four-stroke |
| Bore / Stroke | 40.0mm x 39.2mm |
| Horsepower | 2.41 HP (1.8 KW) @ 7000RPM |
| Torque | 2.36 ft/lbs (3.2 Nm) @ 4250RPM |
| Fuel System | carburetor |
| Ignition | cdi |
| Transmission | Gear box: automatic Final Drive: belt |
| Suspension | Front: oil damped telescopic fork Rear: oil damped coil spring |
| Brakes | Front: single disc Rear: single disc |
| Front Tire | 130/60-13 |
| Rear Tire | 130/60-13 |
| Wheelbase | 55.0 inches (1397 mm) |
| Length | 75.2 inches (1910 mm) |
| Width | 30.31 inches (770 mm) |
| Height | 46.26 inches (1175 mm) |
| Weight | 218.26 pounds (99.0 Kg) (dry), |
| Fuel Capacity | 1.11 Gallon (4.20 Liters) |
| Manuals | Service Manual |
EngineEdit
The engine was a air cooled single cylinder, four-stroke. A 40.0mm bore x 39.2mm stroke result in a displacement of just 49.2 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
DriveEdit
The bike has a automatic transmission.
ChassisEdit
It came with a 130/60-13 front tire and a 130/60-13 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a oil damped telescopic fork while the rear was equipped with a oil damped coil spring. The GW50 was fitted with a 1.11 Gallon (4.20 Liters) fuel tank. The bike weighed just 218.26 pounds (99.0 Kg). The wheelbase was 55.0 inches (1397 mm) long.