Linhai Drive In150: history, specs, pictures
| Linhai Drive In150 | |
| Manufacturer | |
|---|---|
| Also called | Drive In 150, Drive-in 150 |
| Production | 2010 - 2015 |
| Engine | single cylinder, four-stroke |
| Fuel System | carburetor |
| Ignition | cdi |
| Transmission | Gear box: automatic Final Drive: belt |
| Suspension | Front: telescopic hydrualic fork Rear: swing harm with hydraulic shock absorber and pre loaded springs |
| Brakes | Front: single disc. hydraulic Rear: single disc |
| Front Tire | 100/80-16 |
| Rear Tire | 110/80-16 |
| Wheelbase | 56.5 inches (1435 mm) |
| Length | 83.23 inches (2114 mm) |
| Width | 27.13 inches (689 mm) |
| Height | 31.1 inches (790 mm) |
| Seat Height | 31.1 inches (790 mm) |
| Weight | 268.96 pounds (122.0 Kg) (dry), 127.0 kg (wet) |
| Fuel Capacity | 1.32 Gallon (5.00 Liters) |
| Fuel Consumption | 2.80 liters/100 km (35.7 km/l or 84.01 mpg) |
| Manuals | Service Manual |
The Linhai Drive-in 150 was a single cylinder, four-stroke standard produced by Linhai between 2010 and 2015.
Engine[edit | edit source]
The engine was a air cooled single cylinder, four-stroke. Fuel was supplied via a single overhead cams (sohc).
Drive[edit | edit source]
The bike has a automatic transmission. Power was moderated via the automatic.
Chassis[edit | edit source]
It came with a 100/80-16 front tire and a 110/80-16 rear tire. Stopping was achieved via single disc. hydraulic in the front and a single disc in the rear. The front suspension was a telescopic hydrualic fork while the rear was equipped with a swing harm with hydraulic shock absorber and pre loaded springs. The Drive-in 150 was fitted with a 1.32 Gallon (5.00 Liters) fuel tank. The bike weighed just 268.96 pounds (122.0 Kg). The wheelbase was 56.5 inches (1435 mm) long.