Linhai Monarch: history, specs, pictures
Jump to navigation
Jump to search
| Linhai Monarch | |
| Manufacturer | |
|---|---|
| Also called | Monarch LH 250 T, Monarch LH 150 T, Monarch LH 125 T, Monarch 150, Monarch 250, Monarch LH125T, Monarch LH150T, Monarch LH250T, Monarch 125 |
| Production | 2004 - 2009 |
| Engine | single cylinder, four-stroke |
| Bore / Stroke | 52.4mm x 57.7mm |
| Fuel System | carburetor |
| Ignition | electronic |
| Transmission | Final Drive: belt |
| Suspension | Front: hydraulic fork Rear: double hydraulic shock |
| Brakes | Front: single disc Rear: expanding brake (drum brake) |
| Front Tire | 110/90-12 |
| Rear Tire | 130/90-12 |
| Length | 83.07 inches (2110 mm) |
| Width | 30.12 inches (765 mm) |
| Height | 44.49 inches (1130 mm) |
| Weight | 297.62 pounds (135.0 Kg) (dry), 147.0 kg (wet) |
| Fuel Capacity | 2.91 Gallon (11.00 Liters) |
| Fuel Consumption | 3.10 liters/100 km (32.3 km/l or 75.88 mpg) |
| Manuals | Service Manual |
The Linhai Monarch 125 was a single cylinder, four-stroke standard produced by Linhai between 2004 and 2009.
Engine[edit | edit source]
The engine was a air cooled single cylinder, four-stroke. A 52.4mm bore x 57.7mm stroke result in a displacement of just 124.6 cubic centimeters. Fuel was supplied via a overhead cams (ohc).
Chassis[edit | edit source]
It came with a 110/90-12 front tire and a 130/90-12 rear tire. Stopping was achieved via single disc in the front and a expanding brake (drum brake) in the rear. The front suspension was a hydraulic fork while the rear was equipped with a double hydraulic shock. The Monarch 125 was fitted with a 2.91 Gallon (11.00 Liters) fuel tank. The bike weighed just 297.62 pounds (135.0 Kg).