MV Agusta 250 Scrambler B

From CycleChaos
Jump to navigation Jump to search
MV-Agusta-250B--1.jpg
MV Agusta 250 Scrambler B
Manufacturer
Production 1967 - 69
Engine
Four stroke, parallel twin, pushrod, 2 valve per cylinder
Compression ratio 10.0:1
Ignition Dynamo
Transmission 5 Speed
Frame Single beam tubular and pressed steel
Suspension Front: Telescopic hydraulic fork
Rear: Swingarm with hydraulic shocks
Brakes Front: 180mm Drum
Rear: 150mm Drum
Front Tire 2.75- 18
Rear Tire 3.25- 18
Wheelbase 1300 mm / 51.2 in
Weight 142 kg / 313 lbs (dry),
Fuel Capacity 13 Liters / 3.4 US gal
Manuals Service Manual



Engine[edit | edit source]

The engine was a Air cooled cooled Four stroke, parallel twin, pushrod, 2 valve per cylinder. The engine featured a 10.0:1 compression ratio.

Drive[edit | edit source]

Power was moderated via the Wet multiple plate clutch.

Chassis[edit | edit source]

It came with a 2.75- 18 front tire and a 3.25- 18 rear tire. Stopping was achieved via 180mm Drum in the front and a 150mm Drum in the rear. The front suspension was a Telescopic hydraulic fork while the rear was equipped with a Swingarm with hydraulic shocks. The 250 Scrambler B was fitted with a 13 Liters / 3.4 US gal fuel tank. The bike weighed just 142 kg / 313 lbs. The wheelbase was 1300 mm / 51.2 in long.

Photos[edit | edit source]

MV Agusta 250 Scrambler B

Overview[edit | edit source]

MV Agusta 250 Scrambler B









Around the refined twin cylinder engine from the road-going version MV developed this Scambler.

It was characterised by an on-off road configuration, with a raised handlebar and raised twin exhaust on the right. It was a well accepted layout on the US market but was met with skepticism in Italy, also due to the road going tires.

The color scheme was silver with a red stripe on the tank.


Make Model MV Agusta 250 Scrambler B
Year 1967 - 69
Engine Type Four stroke, parallel twin, pushrod, 2 valve per cylinder
Displacement 247
Bore X Stroke 53 x 56 mm
Cooling System Air cooled
Compression 10.0:1
Lubrication Wet sump
Induction 2x 22 mm carburetor
Ignition Dynamo
Starting Kick
Max Power 19 hp / @ 7000 rpm
Clutch Wet multiple plate clutch
Transmission 5 Speed
Final Drive Chain
Frame Single beam tubular and pressed steel
Front Suspension Telescopic hydraulic fork
Rear Suspension Swingarm with hydraulic shocks
Front Brakes 180mm Drum
Rear Brakes 150mm Drum
Front Tire 2.75- 18
Rear Tire 3.25- 18
Dimensions Length: 1960 mm / 77.1 in Width: 620 mm / 24.4 in
Wheelbase 1300 mm / 51.2 in
Dry Weight 142 kg / 313 lbs
Fuel Capacity 13 Liters / 3.4 US gal