Difference between revisions of "Honda CR250R"

    * Engine Type: 249cc liquid-cooled single-cylinder two-stroke with electronically controlled RC valve

    * Bore and Stroke: 66.4mm x 72.0mm

    * Compression Ratio: 8.5:1

    * Induction: Eight-petal crankcase reed-valve

    * Carburetion: 38mm Mikuni TMX flat-slide with throttle position sensor (TPS)

    * Ignition: CDI with three-dimensional mapping and electronic advance

    * Transmission: Close-ratio five-speed

    * Final Drive: #520 chain; 13T/48T

    * Front Suspension: 47mm inverted Showa cartridge fork with 16-position rebound and 16-position compression-damping adjustability;  

    * Rear Suspension: Pro-Link Showa single shock with spring-preload, 17-position rebound-damping adjustability, and compression-damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.6-inch travel

    * Front Brake: Single 240mm disc with twin-piston caliper

    * Rear Brake: Single 240mm disc

    * Front Tire: 80/100-21

    * Rear Tire: 110/90-19

    * Rake: 26.49 degrees

    * Trail: 107.3mm (4.22 inches)

    * Wheelbase: 58.3 inches

    * Seat Height: 37.1 inches

    * Ground Clearance: 13.3 inches

    * Dry Weight: 213.0 pounds