Suzuki Ozark 250 LTF250K: history, specs, pictures
 |
|
| Suzuki Ozark 250 LTF250K | |
| Manufacturer | |
|---|---|
| Production | 2006 |
| Class | ATV |
| Engine | Four Stroke, Single Cylinder, Air Cooled, SOHC, 2-valves per Cylinder |
| Bore / Stroke | 66.0mm x 66.0mm |
| Compression ratio | 9.2:1 |
| Fuel System | Mikuni BS29 Carburetor |
| Transmission | Gear box: 5-Speed, automatic 2WD Final Drive: Shaft |
| Suspension | Front: Independent, Double A-arm, Oil-damped, 5.5 Inches Of Travel Rear: Swingarm-type, Oil-damped, 5.5 Inches Of Travel |
| Brakes | Front: Dual Hydraulic Discs Rear: Mechanical Drum |
| Front Tire | AT 22 X 7-11 |
| Rear Tire | AT 22 X 10-9 |
| Wheelbase | 44.88 inches (1140 mm) |
| Length | 73.58 inches (1869 mm) |
| Width | 42.09 inches (1069 mm) |
| Seat Height | 30.91 inches (785 mm) |
| Weight | 330.0 kg (wet) |
| Recommended Oil | Suzuki ECSTAR 10w40 |
| Manuals | Service Manual |
The Suzuki Ozark 250 LTF250K was a Four Stroke, Single Cylinder, Air Cooled, SOHC, 2-valves per Cylinder ATV produced by Suzuki in 2006.
Engine[edit | edit source]
A 66.0mm bore x 66.0mm stroke result in a displacement of just 246.0 cubic centimeters.
Drive[edit | edit source]
The bike has a 5-Speed, automatic 2WD transmission. Power was moderated via the Automatic.
Chassis[edit | edit source]
It came with a AT 22 X 7-11 front tire and a AT 22 X 10-9 rear tire. Stopping was achieved via Dual Hydraulic Discs in the front and a Mechanical Drum in the rear. The front suspension was a Independent, Double A-arm, Oil-damped, 5.5 Inches Of Travel while the rear was equipped with a Swingarm-type, Oil-damped, 5.5 Inches Of Travel. The wheelbase was 44.88 inches (1140 mm) long.
2006 Suzuki Ozark 250 LTF250K[edit | edit source]
With an engine that punches above it's weight, the Ozark 250 has a broad spread of power and a load of mid-range torque. Smooth transitions between the bodywork, seat and fuel tank make it easier to move back-and forth or side-to-side when riding. Incredibly practical and versatile.