Vento Zip r3i Turbocam: history, specs, pictures
The Vento Zip r3i Turbocam was a single cylinder, two-stroke standard produced by Vento between 2010 and 2013. Max torque was 6.79 ft/lbs (9.2 Nm) @ 6500 RPM. Claimed horsepower was 4.83 HP (3.6 KW) @ 7000 RPM.
| Vento Zip r3i Turbocam | |
| Manufacturer | |
|---|---|
| Production | 2010 - 2013 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 40.0mm x 39.2mm |
| Horsepower | 4.83 HP (3.6 KW) @ 7000RPM |
| Torque | 6.79 ft/lbs (9.2 Nm) @ 6500RPM |
| Fuel System | carburetor |
| Ignition | cdi |
| Transmission | Gear box: automatic Final Drive: belt |
| Suspension | Front: hydraulic fork Rear: single shock, hydraulic |
| Brakes | Front: single disc. abs Rear: expanding brake (drum brake) |
| Front Tire | 100/60-12 |
| Rear Tire | 100/60-12 |
| Length | 65.71 inches (1669 mm) |
| Width | 25.2 inches (640 mm) |
| Height | 42.52 inches (1080 mm) |
| Seat Height | 29.29 inches (744 mm) |
| Weight | 143.08 pounds (64.9 Kg) (dry), |
| Manuals | Service Manual |
EngineEdit
The engine was a air cooled single cylinder, two-stroke. A 40.0mm bore x 39.2mm stroke result in a displacement of just 49.0 cubic centimeters.
DriveEdit
The bike has a automatic transmission.
ChassisEdit
It came with a 100/60-12 front tire and a 100/60-12 rear tire. Stopping was achieved via single disc. abs in the front and a expanding brake (drum brake) in the rear. The front suspension was a hydraulic fork while the rear was equipped with a single shock, hydraulic. The bike weighed just 143.08 pounds (64.9 Kg).