Vespa ET4125: history, specs, pictures
Vespa ET4125 | |
Manufacturer | |
---|---|
Also called | ET4 125 |
Production | 2005 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 57.0mm x 48.6mm |
Top Speed | 59 mph (95 km/h) |
Horsepower | 15.69 HP (11.7 KW) @ 8800RPM |
Ignition | electronic cdi and variable timing |
Transmission | Gear box: automatic Clutch: automatic centrifuge type |
Suspension | Front: oscillating arm with helicoidal spring and hydraulic double effect single damper Rear: helicoidal adjustable spring and hydraulic double effect single damper |
Brakes | Front: double disc Rear: expanding brake (drum brake) |
Front Tire | 100/80-10 |
Rear Tire | 120/70-10 |
Wheelbase | 50.39 inches (1280 mm) |
Length | 69.29 inches (1760 mm) |
Width | 27.56 inches (700 mm) |
Seat Height | 30.71 inches (780 mm) |
Weight | 229.28 pounds (104.0 Kg) (dry), |
Fuel Capacity | 2.38 Gallon (9.00 Liters) |
Manuals | Service Manual |
The Vespa ET4125 was a single cylinder, four-stroke standard produced by Vespa in 2005. It could reach a top speed of 59 mph (95 km/h). Claimed horsepower was 15.69 HP (11.7 KW) @ 8800 RPM.
Engine[edit | edit source]
The engine was a air cooled single cylinder, four-stroke. A 57.0mm bore x 48.6mm stroke result in a displacement of just 124.0 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
Drive[edit | edit source]
The bike has a automatic transmission. Power was moderated via the automatic centrifuge type.
Chassis[edit | edit source]
It came with a 100/80-10 front tire and a 120/70-10 rear tire. Stopping was achieved via double disc in the front and a expanding brake (drum brake) in the rear. The front suspension was a oscillating arm with helicoidal spring and hydraulic double effect single damper while the rear was equipped with a helicoidal adjustable spring and hydraulic double effect single damper. The ET4125 was fitted with a 2.38 Gallon (9.00 Liters) fuel tank. The bike weighed just 229.28 pounds (104.0 Kg). The wheelbase was 50.39 inches (1280 mm) long.