Benelli Velvet 150: history, specs, pictures
'Benelli Velvet 150' | |
Manufacturer | [[Benelli]] |
---|---|
Production | 2006 - 2014 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 57.6mm x 57.8mm |
Horsepower | 10.33 HP (7.7 KW) @ 7750RPM |
Torque | 7.74 ft/lbs (10.5 Nm) @ 6000RPM |
Fuel System | carburetor. pd26jc |
Ignition | electronic |
Transmission | Gear box: automatic Final Drive: belt |
Suspension | Front: hydraulic telescopic fork Rear: floating engine with double hydraulic rear dumper |
Brakes | Front: single disc. floating double piston caliper Rear: single disc. two opposed pistons |
Front Tire | 120/70-r13 |
Rear Tire | 140/70-r13 |
Wheelbase | 55.12 inches (1400 mm) |
Length | 75.2 inches (1910 mm) |
Height | 47.24 inches (1200 mm) |
Seat Height | 32.2 inches (818 mm) |
Weight | 268.96 pounds (122.0 Kg) (dry), 129.0 kg (wet) |
Fuel Capacity | 3.09 Gallon (11.70 Liters) |
Manuals | Service Manual |
The Benelli Velvet 150 was a single cylinder, four-stroke standard produced by Benelli between 2006 and 2014. Max torque was 7.74 ft/lbs (10.5 Nm) @ 6000 RPM. Claimed horsepower was 10.33 HP (7.7 KW) @ 7750 RPM.
Engine
The engine was a air cooled single cylinder, four-stroke. A 57.6mm bore x 57.8mm stroke result in a displacement of just 152.0 cubic centimeters. Fuel was supplied via a overhead cams (ohc).
Drive
The bike has a automatic transmission. Power was moderated via the automatic centrifugal.
Chassis
It came with a 120/70-r13 front tire and a 140/70-r13 rear tire. Stopping was achieved via single disc. floating double piston caliper in the front and a single disc. two opposed pistons in the rear. The front suspension was a hydraulic telescopic fork while the rear was equipped with a floating engine with double hydraulic rear dumper. The Velvet 150 was fitted with a 3.09 Gallon (11.70 Liters) fuel tank. The bike weighed just 268.96 pounds (122.0 Kg). The wheelbase was 55.12 inches (1400 mm) long.