PRC (Pro Racing Cycles) RR: history, specs, pictures
PRC (Pro Racing Cycles) RR | |
Manufacturer | |
---|---|
Also called | RR-65 |
Production | 2008 |
Engine | single cylinder, two-stroke |
Bore / Stroke | 45.0mm x 40.8mm |
Fuel System | carburetor. mikuni vm 24 |
Ignition | digital |
Transmission | Final Drive: chain Clutch: wet 3 inch multi-disc clutch, operated hydraulically. |
Suspension | Front: inverted prc 41 mm with high and low speed rebound and compression adjusters Rear: penske 26 way adjustable res shock progressive springs |
Brakes | Front: single disc Rear: single disc |
Front Tire | 60/100-14 |
Rear Tire | 90/100-12 |
Wheelbase | 45.94 inches (1167 mm) |
Seat Height | 32.24 inches (819 mm) |
Weight | 115.96 pounds (52.6 Kg) (dry), |
Manuals | Service Manual |
The PRC (Pro Racing Cycles) RR-65 was a single cylinder, two-stroke standard produced by PRC (Pro Racing Cycles) in 2008.
Engine[edit | edit source]
The engine was a liquid cooled single cylinder, two-stroke. A 45.0mm bore x 40.8mm stroke result in a displacement of just 65.0 cubic centimeters.
Drive[edit | edit source]
Power was moderated via the wet 3 inch multi-disc clutch, operated hydraulically..
Chassis[edit | edit source]
It came with a 60/100-14 front tire and a 90/100-12 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a inverted prc 41 mm with high and low speed rebound and compression adjusters while the rear was equipped with a penske 26 way adjustable res shock progressive springs. The bike weighed just 115.96 pounds (52.6 Kg). The wheelbase was 45.94 inches (1167 mm) long.