Valenti RME: history, specs, pictures
| Valenti RME | |
| Manufacturer | |
|---|---|
| Also called | RME Factory 50, RME Race 50, RME50, RME 50 |
| Production | 2013 - 2016 |
| Engine | single cylinder, two-stroke |
| Bore / Stroke | 40.0mm x 39.9mm |
| Fuel System | carburetor. pwk 28 |
| Transmission | Gear box: 6-speed Final Drive: chain |
| Suspension | Front: tech 43 mm Rear: tech 43 mm |
| Brakes | Front: single disc Rear: single disc |
| Front Tire | 90/90-21 |
| Rear Tire | 110/80-18 |
| Wheelbase | 54.33 inches (1380 mm) |
| Length | 85.04 inches (2160 mm) |
| Width | 31.69 inches (805 mm) |
| Height | 48.43 inches (1230 mm) |
| Seat Height | 36.22 inches (920 mm) |
| Weight | 180.78 pounds (82.0 Kg) (dry), |
| Fuel Capacity | 1.82 Gallon (6.90 Liters) |
| Manuals | Service Manual |
The Valenti RME Factory 50 was a single cylinder, two-stroke standard produced by Valenti between 2013 and 2016.
Engine[edit | edit source]
The engine was a liquid cooled single cylinder, two-stroke. A 40.0mm bore x 39.9mm stroke result in a displacement of just 49.9 cubic centimeters.
Drive[edit | edit source]
The bike has a 6-speed transmission. Power was moderated via the wet multidisk.
Chassis[edit | edit source]
It came with a 90/90-21 front tire and a 110/80-18 rear tire. Stopping was achieved via single disc in the front and a single disc in the rear. The front suspension was a tech 43 mm while the rear was equipped with a tech 43 mm. The RME Factory 50 was fitted with a 1.82 Gallon (6.90 Liters) fuel tank. The bike weighed just 180.78 pounds (82.0 Kg). The wheelbase was 54.33 inches (1380 mm) long.