Honda NC750X MT
'Honda NC750X MT' | |
Manufacturer | [[Honda]] |
---|---|
Production | 2018 |
Class | [[:Category:Road motorcycles|Road]] [[Category:Road motorcycles]] |
Engine | Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinder. EURO4 compliant |
Bore / Stroke | 76.2mm x 76.2mm |
Compression ratio | 10.7:1 |
Horsepower | 54.98 HP (41.0 KW) @ 6250RPM |
Torque | 50.16 ft/lbs (68.0 Nm) @ 4750RPM |
Fuel System | PGM-FI electronic fuel injection |
Transmission | Gear box: 6-Speed Manual Transmission Final Drive: Chain |
Suspension | Front: 41mm telescopic fork, 153.5mm stroke Rear: Monoshock damper, Pro-Link swingarm, 150mm travel |
Brakes | Front: 320mm single wavy hydraulic disc with 2-piston caliper and sintered metal pads Rear: 240mm single wavy hydraulic disc with single-piston caliper and resin mold pads |
Front Tire | 120/70-ZR17M/C (58W) |
Rear Tire | 160/60-ZR17M/C (69W) |
Wheelbase | 60.39 inches (1534 mm) |
Length | 87.8 inches (2230 mm) |
Width | 33.31 inches (846 mm) |
Seat Height | 32.72 inches (831 mm) |
Weight | 230.0 kg (wet) |
Recommended Oil | Honda GN4 10W-40 |
Manuals | Service Manual |
The Honda NC750X MT was a Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinder. EURO4 compliant Road motorcycle produced by Honda in 2018. Max torque was 50.16 ft/lbs (68.0 Nm) @ 4750 RPM. Claimed horsepower was 54.98 HP (41.0 KW) @ 6250 RPM.
Engine
A 76.2mm bore x 76.2mm stroke result in a displacement of just 745.0 cubic centimeters.
Drive
The bike has a 6-Speed Manual Transmission transmission. Power was moderated via the Wet multiplate clutch.
Chassis
It came with a 120/70-ZR17M/C (58W) front tire and a 160/60-ZR17M/C (69W) rear tire. Stopping was achieved via 320mm single wavy hydraulic disc with 2-piston caliper and sintered metal pads in the front and a 240mm single wavy hydraulic disc with single-piston caliper and resin mold pads in the rear. The front suspension was a 41mm telescopic fork, 153.5mm stroke while the rear was equipped with a Monoshock damper, Pro-Link swingarm, 150mm travel. The wheelbase was 60.39 inches (1534 mm) long.
2018 Honda NC750X MT
The design of the NC750X has a liquid-cooled, SOHC 8-valve parallel twin-cylinder engine ensures punchy performance in the low-to-mid range. Its relatively long-stroke architecture and specially shaped combustion chambers combine with the high-inertial mass crankshaft to produce large amounts of effortless torque from very low rpm. Its forward-leaning position brings the centre of gravity down for optimum stability.