Yamaha DT 125RE: history, specs, pictures
Yamaha DT 125RE | |
Manufacturer | |
---|---|
Production | 1998 |
Class | Enduro |
Engine | Single cylinder, two stroke, liquid-cooled |
Bore / Stroke | 55.9mm x 55.9mm |
Compression ratio | 6.8:1 |
Horsepower | 15.02 HP (11.2 KW) @ 7000RPM |
Torque | 11.8 ft/lbs (16.0 Nm) @ 7000RPM |
Fuel System | Carburetor |
Transmission | Gear box: 6-Speed Final Drive: Chain |
Suspension | Front: Telescopic forks Rear: Monocross linkage |
Brakes | Front: Single disc 230 mm Rear: Single disc 220 mm |
Front Tire | 80/90-21 |
Rear Tire | 110/80-18 |
Wheelbase | 55.71 inches (1415 mm) |
Length | 84.09 inches (2136 mm) |
Width | 32.28 inches (820 mm) |
Seat Height | 34.8 inches (884 mm) |
Weight | 123.0 kg (wet) |
Recommended Oil | Yamalube 10w-40 |
Manuals | Service Manual |
The Yamaha DT 125RE was a Single cylinder, two stroke, liquid-cooled Enduro motorcycle produced by Yamaha in 1998. Max torque was 11.8 ft/lbs (16.0 Nm) @ 7000 RPM. Claimed horsepower was 15.02 HP (11.2 KW) @ 7000 RPM.
Engine[edit | edit source]
A 55.9mm bore x 55.9mm stroke result in a displacement of just 123.0 cubic centimeters.
Drive[edit | edit source]
The bike has a 6-Speed transmission. Power was moderated via the Wet multi-plate.
Chassis[edit | edit source]
It came with a 80/90-21 front tire and a 110/80-18 rear tire. Stopping was achieved via Single disc 230 mm in the front and a Single disc 220 mm in the rear. The front suspension was a Telescopic forks while the rear was equipped with a Monocross linkage. The wheelbase was 55.71 inches (1415 mm) long.
1998 - 2000 Yamaha DT 125RE[edit | edit source]
The latest DT 125RE has been built to run with the best of them on the street. This bike is powered by a responsive liquid-cooled, two stroke engine with a 6-speed transmission.