Vespa P125X: history, specs, pictures
Vespa P125X | |
Manufacturer | |
---|---|
Production | 1977 |
Class | Scooter |
Engine | Single cylinder, two stroke, air cooled |
Bore / Stroke | 53.3mm x 53.3mm |
Compression ratio | 9.2:1 |
Horsepower | 8.05 HP (6.0 KW) @ 5800RPM |
Torque | 7.38 ft/lbs (10.0 Nm) @ 4500RPM |
Fuel System | Carburetor |
Transmission | Gear box: 4-Speed Final Drive: Direct drive |
Suspension | Front: Helical spring and double acting hydraulic dampers Rear: Helical spring and double acting hydraulic dampers |
Brakes | Front: Drum Rear: Drum |
Front Tire | 3.5x10 |
Rear Tire | 3.5x10 |
Wheelbase | 49.21 inches (1250 mm) |
Length | 65.2 inches (1656 mm) |
Width | 31.1 inches (790 mm) |
Seat Height | 31.1 inches (790 mm) |
Weight | 118.0 kg (wet) |
Manuals | Service Manual |
The Vespa P125X was a Single cylinder, two stroke, air cooled scooter produced by Vespa in 1977. Max torque was 7.38 ft/lbs (10.0 Nm) @ 4500 RPM. Claimed horsepower was 8.05 HP (6.0 KW) @ 5800 RPM.
Engine[edit | edit source]
A 53.3mm bore x 53.3mm stroke result in a displacement of just 123.4 cubic centimeters.
Drive[edit | edit source]
The bike has a 4-Speed transmission. Power was moderated via the Wet Multi-plate.
Chassis[edit | edit source]
It came with a 3.5x10 front tire and a 3.5x10 rear tire. Stopping was achieved via Drum in the front and a Drum in the rear. The front suspension was a Helical spring and double acting hydraulic dampers while the rear was equipped with a Helical spring and double acting hydraulic dampers. The wheelbase was 49.21 inches (1250 mm) long.
1977 - 1997 Vespa P125X[edit | edit source]
Vespa P125X was presented in 1977 at the Milan Motorcycles Exhibition as the Vespa New Line. This model offers a better driving comfort, the storage is larger, and the foam polyurethane saddle is more comfortable.