Linhai Drive In125: history, specs, pictures
Linhai Drive In125 | |
Manufacturer | |
---|---|
Also called | Drive In, Drive In 125, Drive-in 125 |
Production | 2009 - 2015 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 52.4mm x 57.8mm |
Horsepower | 7.91 HP (5.9 KW) @ 7250RPM |
Torque | 5.31 ft/lbs (7.2 Nm) @ 4250RPM |
Fuel System | carburetor |
Ignition | cdi |
Transmission | Gear box: automatic Final Drive: belt |
Suspension | Front: telescopic hydrualic fork Rear: swing harm with hydraulic shock absorber and pre loaded springs |
Brakes | Front: single disc. hydraulic Rear: single disc |
Front Tire | 100/80-16 |
Rear Tire | 110/80-16 |
Wheelbase | 56.5 inches (1435 mm) |
Length | 83.23 inches (2114 mm) |
Width | 27.13 inches (689 mm) |
Height | 31.1 inches (790 mm) |
Weight | 264.55 pounds (120.0 Kg) (dry), |
Fuel Capacity | 1.32 Gallon (5.00 Liters) |
Fuel Consumption | 2.80 liters/100 km (35.7 km/l or 84.01 mpg) |
Manuals | Service Manual |
The Linhai Drive-in 125 was a single cylinder, four-stroke standard produced by Linhai between 2009 and 2015. Max torque was 5.31 ft/lbs (7.2 Nm) @ 4250 RPM. Claimed horsepower was 7.91 HP (5.9 KW) @ 7250 RPM.
Engine[edit | edit source]
The engine was a air cooled single cylinder, four-stroke. A 52.4mm bore x 57.8mm stroke result in a displacement of just 124.6 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
Drive[edit | edit source]
The bike has a automatic transmission. Power was moderated via the automatic.
Chassis[edit | edit source]
It came with a 100/80-16 front tire and a 110/80-16 rear tire. Stopping was achieved via single disc. hydraulic in the front and a single disc in the rear. The front suspension was a telescopic hydrualic fork while the rear was equipped with a swing harm with hydraulic shock absorber and pre loaded springs. The Drive-in 125 was fitted with a 1.32 Gallon (5.00 Liters) fuel tank. The bike weighed just 264.55 pounds (120.0 Kg). The wheelbase was 56.5 inches (1435 mm) long.