Difference between revisions of "Kawasaki Z650"

Jump to navigation Jump to search
7 bytes removed ,  00:19, 2 July 2019
m
no summary specified
m (no summary specified)
m (no summary specified)
Line 4: Line 4:
==1976/1977 Z650-B1==
==1976/1977 Z650-B1==
Starting Frame Number: KZ650B-000001<br>
Starting Frame Number: KZ650B-000001<br>
This [[four-stroke]] four-cylinder [[motorcycle]] boasted double overhead camshafts just like the bigger Z1 and Kawasaki claimed 64 BHP from the 652cc motor. Unlike the Z1, the 650 used a plain bearing [[crankshaft]] and used a primary [[chain drive|drive chain]] instead of a gear driven unit. A single 245mm [[disk brake|disk]] was used up front with a 250mm [[drum brake|drum]] on the rear, more than enough to handle this relatively lightweight bike. It was offered in two colours, candy super red or candy emerald green, the green proved very popular in the UK.
This [[four-stroke]] four-cylinder [[motorcycle]] boasted double overhead camshafts just like the bigger Z1 and Kawasaki claimed 64 BHP from the 652cc motor. Unlike the Z1, the 650 used a plain bearing [[crankshaft]] and used a primary [[chain drive|drive chain]] instead of a gear driven unit. A single 245mm [[disk brake|disk]] was used up front with a 250mm [[drum brake|drum]] on the rear, more than enough to handle this relatively lightweight bike. It was offered in two colors, candy super red or candy emerald green, the green proved very popular in the UK.


==1978 Z650-B2==
==1978 Z650-B2==
Starting Frame Number: KZ650B-027501<br>
Starting Frame Number: KZ650B-027501<br>
Two colours were offered for 1978, luminous dark blue or luminous burnt red. These proved to be unpopular and the B2 sold no where near as well as the B1. Very few other differences were made to the B2. The front brake [[caliper]] was reversed to the back of the fork leg and the front [[master cylinder]] was changed from a round item to a triangular one. The [[charging system]] was changed from a three-phase system to a two phase and the regulator and rectifier was now a combined unit. The cam chain tensioner was changed to an automatic unit and a hazard switch was added to the left-hand switchgear. [[Needle roller bearings]] were now used in the [[swingarm]] instead of the previous model bushes and slight modifications were made to the carbs to improve low speed operation. The fuel tap was replaced with a [[diaphragm]] type unit. There were also slight detail changes to the outer engine cases to incorporate the new lower case Kawasaki logo. The front footrests were now rubber mounted to combat vibration and the front forks were slightly modified.
Two colors were offered for 1978, luminous dark blue or luminous burnt red. These proved to be unpopular and the B2 sold no where near as well as the B1. Very few other differences were made to the B2. The front brake [[caliper]] was reversed to the back of the fork leg and the front [[master cylinder]] was changed from a round item to a triangular one. The [[charging system]] was changed from a three-phase system to a two phase and the regulator and rectifier was now a combined unit. The cam chain tensioner was changed to an automatic unit and a hazard switch was added to the left-hand switchgear. [[Needle roller bearings]] were now used in the [[swingarm]] instead of the previous model bushes and slight modifications were made to the carbs to improve low speed operation. The fuel tap was replaced with a [[diaphragm]] type unit. There were also slight detail changes to the outer engine cases to incorporate the new lower case Kawasaki logo. The front footrests were now rubber mounted to combat vibration and the front forks were slightly modified.


==1978 Z650-C2==
==1978 Z650-C2==
Line 16: Line 16:
==1979 Z650-B3==
==1979 Z650-B3==
Starting Frame Number: KZ650B-046201<br>
Starting Frame Number: KZ650B-046201<br>
The only difference over the B2 model was a change of graphics and a return to the original green and red colours. Sales once again picked up. The new lower case tank badges were also used. This time the red color was described as candy persimmon red.   
The only difference over the B2 model was a change of graphics and a return to the original green and red colors. Sales once again picked up. The new lower case tank badges were also used. This time the red color was described as candy persimmon red.   
==1979 Z650-C3==
==1979 Z650-C3==
Starting Frame Number: KZ650C-022801<br>
Starting Frame Number: KZ650C-022801<br>
Line 30: Line 30:
==1980 Z650-F1==
==1980 Z650-F1==
Starting Frame Number: KZ650F-000001<br>
Starting Frame Number: KZ650F-000001<br>
The F1 was basically a cross between a C and a B model. It had the alloy wheels but kept the drum brake at the rear instead of a disk. It was offered in three colours, blue, red or green.   
The F1 was basically a cross between a C and a B model. It had the alloy wheels but kept the drum brake at the rear instead of a disk. It was offered in three colors, blue, red or green.   
==1981 Z650-F2==
==1981 Z650-F2==
Starting Frame Number: KZ650F-007201<br>
Starting Frame Number: KZ650F-007201<br>
The F2 was much modified over the F1 model. It incorporated many of the larger Z750E parts. The motor was now finished in black and used CDI ignition instead of points. The front end from the 750E was grafted on meaning a change to the brakes, front wheel and clocks. It was offered in three colours, red, green or blue. The [[Kick start|kick-starter]] pedal and shaft was removed from the engine just like the Z750E. A passenger grab rail was also fitted.
The F2 was much modified over the F1 model. It incorporated many of the larger Z750E parts. The motor was now finished in black and used CDI ignition instead of points. The front end from the 750E was grafted on meaning a change to the brakes, front wheel and clocks. It was offered in three colors, red, green or blue. The [[Kick start|kick-starter]] pedal and shaft was removed from the engine just like the Z750E. A passenger grab rail was also fitted.


==1981 Z650-D4==
==1981 Z650-D4==
Line 40: Line 40:
==1982 Z650-F3==
==1982 Z650-F3==
Starting Frame Number: KZ650F-012401<br>
Starting Frame Number: KZ650F-012401<br>
There was one major change for 1982, CV carbs were fitted. The larger 32mm carbs also needed the air box assembly from the Z750E/L models. The F3 was offered in two colours, ebony or passion red. The front fender was now also painted to match the rest of the bodywork.   
There was one major change for 1982, CV carbs were fitted. The larger 32mm carbs also needed the air box assembly from the Z750E/L models. The F3 was offered in two colors, ebony or passion red. The front fender was now also painted to match the rest of the bodywork.   
==1983 Z650-F4==
==1983 Z650-F4==
Starting Frame Number: KZ650F-014301<br>
Starting Frame Number: KZ650F-014301<br>
This was the last of the 650 models, Kawasaki was now concentrating on the GPZ range and there was no place for this previous best seller. The F4 was offered in two colours, galaxy silver or candy wine red. The outer engine cases were similar to the Z750L model.   
This was the last of the 650 models, Kawasaki was now concentrating on the GPZ range and there was no place for this previous best seller. The F4 was offered in two colors, galaxy silver or candy wine red. The outer engine cases were similar to the Z750L model.   


There was also a Z650H model, not available in the UK. This was a 'CSR' model with chopper styling.
There was also a Z650H model, not available in the UK. This was a 'CSR' model with chopper styling.
71,744

edits

Navigation menu