Yamaha Gladiator: history, specs, pictures
Yamaha Gladiator | |
Manufacturer | |
---|---|
Also called | Gladiator Type J.A. |
Production | 2007 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 54.0mm x 54.0mm |
Horsepower | 10.46 HP (7.8 KW) @ 7500RPM |
Torque | 7.67 ft/lbs (10.4 Nm) @ 6500RPM |
Fuel System | carburetor |
Transmission | Final Drive: chain Clutch: multiplate wet type |
Suspension | Front: telescopic hydraulic type Rear: rectangular swing arm with hydraulic shock absorber |
Brakes | Front: expanding brake (drum brake) Rear: expanding brake (drum brake) |
Wheelbase | 51.18 inches (1300 mm) |
Length | 81.3 inches (2065 mm) |
Width | 28.74 inches (730 mm) |
Height | 43.31 inches (1100 mm) |
Weight | 271.17 pounds (123.0 Kg) (dry), |
Recommended Oil | Yamalube 10w-40 |
Fuel Capacity | 3.43 Gallon (13.00 Liters) |
Manuals | Service Manual |
The Yamaha Gladiator was a single cylinder, four-stroke standard produced by Yamaha in 2007. Max torque was 7.67 ft/lbs (10.4 Nm) @ 6500 RPM. Claimed horsepower was 10.46 HP (7.8 KW) @ 7500 RPM.
Engine[edit | edit source]
The engine was a air cooled single cylinder, four-stroke. A 54.0mm bore x 54.0mm stroke result in a displacement of just 123.7 cubic centimeters. Fuel was supplied via a single overhead cams (sohc).
Drive[edit | edit source]
Power was moderated via the multiplate wet type.
Chassis[edit | edit source]
Stopping was achieved via expanding brake (drum brake) in the front and a expanding brake (drum brake) in the rear. The front suspension was a telescopic hydraulic type while the rear was equipped with a rectangular swing arm with hydraulic shock absorber. The Gladiator was fitted with a 3.43 Gallon (13.00 Liters) fuel tank. The bike weighed just 271.17 pounds (123.0 Kg). The wheelbase was 51.18 inches (1300 mm) long.