Honda Dream Yuga: history, specs, pictures
Honda Dream Yuga | |
Manufacturer | |
---|---|
Production | 2013 - 2014 |
Engine | single cylinder, four-stroke |
Bore / Stroke | 50.0mm x 55.6mm |
Horsepower | 8.31 HP (6.2 KW) @ 7500RPM |
Torque | 6.56 ft/lbs (8.9 Nm) @ 5500RPM |
Fuel System | carburetor |
Ignition | fully transisterized |
Transmission | Gear box: 4-speed Final Drive: chain |
Suspension | Front: telescopic forks Rear: tube type both slide operation |
Brakes | Front: expanding brake (drum brake) Rear: expanding brake (drum brake) |
Front Tire | 80/100-18 |
Rear Tire | 80/100-18 |
Wheelbase | 50.59 inches (1285 mm) |
Length | 79.61 inches (2022 mm) |
Width | 28.86 inches (733 mm) |
Height | 43.11 inches (1095 mm) |
Weight | 108.0 kg (wet) |
Recommended Oil | Honda GN4 10W-40 |
Fuel Capacity | 2.11 Gallon (8.00 Liters) |
Manuals | Service Manual |
The Honda Dream Yuga was a single cylinder, four-stroke standard produced by Honda between 2013 and 2014. Max torque was 6.56 ft/lbs (8.9 Nm) @ 5500 RPM. Claimed horsepower was 8.31 HP (6.2 KW) @ 7500 RPM.
Engine[edit | edit source]
The engine was a air cooled single cylinder, four-stroke. A 50.0mm bore x 55.6mm stroke result in a displacement of just 109.0 cubic centimeters. Fuel was supplied via a overhead cams (ohc).
Drive[edit | edit source]
The bike has a 4-speed transmission.
Chassis[edit | edit source]
It came with a 80/100-18 front tire and a 80/100-18 rear tire. Stopping was achieved via expanding brake (drum brake) in the front and a expanding brake (drum brake) in the rear. The front suspension was a telescopic forks while the rear was equipped with a tube type both slide operation. The Dream Yuga was fitted with a 2.11 Gallon (8.00 Liters) fuel tank. The wheelbase was 50.59 inches (1285 mm) long.